Powerite 5A 6V/12V Smart Battery Charger and Maintainer with Clamps
Smart 9 stage battery charger and maintainer for lead-acid batteries. Suitable for batteries with a capacity of 1.2-120 Ah.
Our Top Pick/Upgrade Options
Powerite 5A 6V/12V Smart Battery Charger and Maintainer with Clamps
Description
The Powerite Smart Battery Charger is intended for trickle charging on lead-acid batteries and a variety of sealed, maintenance-free lead acid batteries with a nominal voltage of 6 volts or 12 volts and a capacity of 1.2 to 120 Ah as commonly installed in vehicles. Suitable batteries include:
- Lead-acid batteries (WET)
- Gel batteries (gel-like electrolyte)
- AGM batteries (electrolyte absorbed in glass mat).
- Maintenance-free lead acid batteries (MF)
- Not suitable for Li-ion batteries
Equipped with a micro-processor for smarter charger. Use the MODE key to select one of the below mentioned charging modes depending on battery type, battery condition and environmental conditions.
Once you have selected the suitable charging mode, the charger will automatically detect the connected battery (voltage, capacity, charge status) and calculate the necessary charging parameters (charging voltage and current).
If you select a charging mode unsuitable for the connected battery, or if the battery is defective or incorrectly connected, the charger will not charge and the fault icon will appear. This is not a fault on the charger.
Technical Information
| Technical specifications | ||
|---|---|---|
| Operating voltage: | 6V Mode | 12V mode |
| Output voltage | 220-240V AC, 50-60 Hz | 220-240V AC, 50-60 Hz |
| Max. Charging voltage | 6V DC | 12V DC |
| Charging current | 7.4 V | 14.6V/14.8V |
| Ambient temperatures | 2.5 A | 2,5 A / 5,0 A |
| Housing IP class: IP65 | -5°C to +40°C | -5°C to +40°C |



